Cine
matography
101
Want to get to grips with cinematography? Here's a few simple rules/tips/guidelines that you'll still be using in 10 years, whether it's for live action or improving AI shots
Shoot from the shadows
Light in front of actors flattens their features. This can make them look more attractive by softening their faces (it's why influencers have light rings behind their cameras), but it has a limited dramatic range.
If in doubt about what to do with your lighting, stick the light on the other side of the actor to your camera, and watch your shots come to life.
Big and close is soft
Softness is not a setting. No real light has a softness option, and no digital light has one unless it's doing a horrible fake.
Softness/hardness of light is defined by two things - size relative to the object, and distance. If a light is bigger, light rays come from more directions, and more directions means softer light. If a light is further back, it will bounce around more surfaces, resulting in more directions...and more directions means softer light.
But but but wait...direct sunlight is quite hard, even though the sun is massive and far away. Yes, but as far as the object (let's say a person) is concerned, the sun is the size of a pea. All the light comes from the same direction. Same direction means harder light.
Fill the sky with clouds and sunlight becomes very soft - because those same rays are bouncing around the sky and clouds and hitting the object from every possible direction. And all together now... more direction means...? SOFTER! Very good.
Fill sets the mood
Key light is your main light source. Fill light is the soft light that's bounced onto you. On a sunny day, the yellow sunlight is the key, and the blue light that has come from bouncing around the sky is the fill.
The strength of your key to your fill is called your key-to-fill ratio. Going heavier on the key is more dramatic. Going heavier on the fill is more gentle. Use whatever is appropriate given the location and story.
Distance controls the background
Light spreads out as it travels, so it loses intensity fast at first and slowly later. Close to the subject, the extra metre to the wall is a huge percentage of the total distance, so the wall goes dark. Far away, that same metre barely counts and everything lifts together.
Use whatever works - but be aware that the more your actors are visually separate from their background, the easier they will be to read. That separation can be through value (the amount of light), colour, or lens focus.
Getting closer
To get closer to a subject, you have two options. One - move your little trotters over to them to get closer. The other, use a longer lens to get closer. These are not the same thing - longer lenses flatten distances, wider lenses stretch them. A face is generally flattered by a slightly longer lens, since a wider one will stretch the features. But if you're shooting in a small space and you need to create some feeling of distance, you'll either need to smash a hole in the wall to get further from your actors, or use a wider lens.
Height is status
The camera is the audience, so wherever you put it is where they stand. Small things look up to big things, and vice versa. Our natural instincts assume that small is weak and big is powerful.
A confident mouse will probably be shot with a camera pointing up to it - unless that same mouse is in conversation with a person, when you might want the camera to assume the person's point of view. How do you solve that problem? The mouse is confident, and we want to say it's stronger than the person, but you're looking at it from a taller person's point of view? Something to think about... (and once you've had a think, there's a couple of ideas below)
How to make the mouse threatening? Outside of giving it a massive gun, here's some ideas...
1. You can get the camera as low as possible, and instead of going over the shoulder on the person, you just have their foot in shot. You'd need just enough to register that it belongs to the person, because if you have too much it'll dwarf the mouse and look like a threat.
2. There's a simple one in the staging - give the mouse an excuse to be on higher ground.
3. There's a clever solution with your camera lens. If you have a long lens and shoot over the person's shoulder, the angle will still be down, but the mouse will be much bigger in shot. Then when you shoot the over the shoulder shot of the mouse, use a longer lens so that the person seems smaller.
Depth is built in layers
Depth isn't "good" or "bad", but if in doubt, look for more, it gives the audience room to explore. The Old Masters often used to paint in a window in their paintings to let the audience's eyes leave the image after having looked at it. That's depth - kill it if you want the audience to feel closed in.
Highlights do not come back
Even on a professional level camera, if you lose your highlights, they might end up "clamped", meaning a whole area is white, and you can't recover any details. You can lose things to shadows too, but more likely that there will be information there that's recoverable, but noisy. Cameras will normally have previews that allow you to identify under and over exposed areas, so use them. If in doubt, go for a middle exposure and push it to your desired extreme in post.
Setups, and what they cost
More lights gives you more control, and more ability to paint/sculpt with light. The trade off is in the cost of the lights, and the increased set up time.
To 80/20 it, only ever start with one light, and add additional ones only when they're necessary. Once you've finished a setup, turn each light off in reverse priority order to check that they're definitely contributing something useful.
Three point lighting is the film school/Hollywood go to, because it solves three separate problems in a fixed order: shape, how deep the shadows go, and separating the subject from the wall. Learn it as three questions rather than three lamps and you can answer them any way you like, including with one source, a bounce card, or a window. Every lamp you add buys you control and costs you time, and it makes the light harder to believe in.
Simple is almost always better.
